上海艾荔艾金属材料有限公司Shanghai Ailiai Metallic Material Co.,Ltd. 上海艾荔艾金属材料有限公司Shanghai Ailiai Metallic Material Co.,Ltd. 作为值得信赖的合作伙伴和高品质金属合金的半成品供应商,上海艾荔艾金属材料有限公司拥有完善的服务体系和专业的团队。在同客户交易的过程中,我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求,艾荔艾致力于为客户提供优质的金属材料解决方案。

设为首页 | 加入收藏
021-67660801/02

产品分类

您的位置:首页 > 产品展示 > 钛合金 > Grade 7(Ti-0.15Pd)钛钯合金Grade 16(Ti-0.05Pd)钯钛合金化学成分物理力学性能
Grade 7(Ti-0.15Pd)钛钯合金Grade 16(Ti-0.05Pd)钯钛合金化学成分物理力学性能 Grade 7(Ti-0.15Pd)钛钯合金Grade 16(Ti-0.05Pd)钯钛合金化学成分物理力学性能 Grade 7(Ti-0.15Pd)钛钯合金Grade 16(Ti-0.05Pd)钯钛合金化学成分物理力学性能

Grade 7(Ti-0.15Pd)钛钯合金Grade 16(Ti-0.05Pd)钯钛合金化学成分物理力学性能

Grade 7(Ti-0.15Pd)钛钯合金Grade 16(Ti-0.05Pd)钯钛合金化学成分物理力学性能

TI–PD GRADE 7 & GRADE 16
Ti-0.15Pd (Grade 7)
This alloy has mechanical properties similar to Commercially Pure Titanium Grade 2 but
has improved resistance to general and localised crevice corrosion in a wide range °F reducing acid environments including chlorides, with a good balance °F moderate strength, reasonable ductility and excellent weldability.


Ti-0.05Pd (Grade 16)
Grade 16 is identical to Grade 7 with the exception that the palladium added to improve corrosion resistance is less than with Grade 7. Mechanical and physical properties, specifications and forms are all identical to those °F Grade 7.
The alloy composition differs by the reduction °F Pd to 0.04-0.08%.
Note: The poor availability and high cost °F palladium have led to the development °F ruthenium as an alternative alloy addition to provide similar enhancement °F corrosion resistance but at lower cost. The relevant ASTM Grades is 26 (CP Grade 2 + 0.1% Ru).

Mechanical and physical properties are °F the same order as described for grades 7 and 16.


Composition
C
Fe
N2
Pd 0.12-0,.25 % for Grade 7 and 0.04-0.08% for Grade 16
O2
H2(sheet)
H2(bar)
Ti ~ Rem


Specifications/Designations for Grades 11 and 17
ASTM B265
ASTM B337 Gr7 only
ASTM B338
ASTM B348
ASTM B363 (WPT)
ASTM B381
ASTM B861
ASTM B862
ASTM B863
ASTM F467 Gr7 Fasteners
ASTM F468 " "
See also ASTM list °F B367 casting grades °F palladium containing alloys for approximate equivalent specifications to the wrought grades above.

 

Physical Data
                                                        Typical
Density g/cm3 (lb/cu.in)                                4.51 (0.162)
Melting Range°C±15°C (°F)                           1677 (3051)
Specific Heat J/Kg/°C (BTU/lb/°F)                     540 (.129)
Volume Electrical Resistivity mohm.cm(mohm.in)          56 (22)
Thermal Conductivity W/mk (BTU/ft h°F)                 20.6 (143)
Mean Thermal Exp. Coeff. 0-100°C/°C (0 - 212°F/°F)  8.6x10-6 (4.8)
Mean Thermal Exp. Coeff. 0-300°C/°C (0 - 572°F/°F)  9.2x10-6 (5.1)
Beta Transus °C±15°C(°F)                            913 (1675)


Mechanical Data
                                                Minimum Typical
Tensile Strength MPa (ksi)                      345 (50) 483 (70)
0.2% Proof Stress MPa (ksi)                     376 (40) 352 (51)
Elongation over 2 inches %                      20       28
Elastic Modulus GPa (Msi)                                103 (15)
Hardness Bhn                                             160
Specified Bend Radius
Specified Bend Radius > 0.070in x Thickness              2.5
Welded Bend Radius x Thickness                  3
Charpy,V-Notch Impact J(ft lbf)                 41 (30)


Forms Available
Strip; Ingot & Bloom; Billet; Slab; Bar; Wire; Sheet; Plate; Forgings; Castings;

Tube-Welded


Fabrication
Weldability              - Excellent
Forging                  - Rough 900°C (1650°F),
                           Finish 843°C (1550°F)
Annealing                - 704°C (1300°F), 2hr, AC
Stress Relief Annealing  - 483-538°C (900-1000°F), 45 mins.

以上资料由上海艾荔艾金属材料有限公司提供,欢迎新老客户来电洽购。

本文来自上海艾荔艾金属材料有限公司http://www.shailiai.com,转载请注明出处。