新闻资讯

您的位置：首页 > 新闻资讯 > 产品工艺 > 2195铝锂合金摩擦搅拌焊接头组织

2195铝锂合金摩擦搅拌焊接头组织

发布人：上海艾荔艾合金股份有限公司www.shailiai.cn 更新时间：2016-06-03

采用圆柱形搅拌头和带螺纹搅拌头，制备2195-T8铝锂合金摩擦搅拌焊接头，研究搅拌头前进速度与旋转速度对接头孔洞缺陷的影响，分析接头的显微组织特征。

2195铝锂合金摩擦搅拌焊接头组织Structure of friction-stir welding joint of 2195 Al-Li alloy

采用圆柱形搅拌头和带螺纹搅拌头，制备2195-T8铝锂合金摩擦搅拌焊接头，研究搅拌头前进速度与旋转速度对接头孔洞缺陷的影响，分析接头的显微组织特征。结果表明:当圆柱形搅拌头旋转速度与前进速度比值不当时，在接头前进侧下部容易产生贯穿整个接头的隧道型缺陷(连续孔洞);采用带螺纹搅拌头可以消除接头的这种缺陷，有效提高接头抗拉强度。2195-T8铝锂合金基材中强化相包括T1相(Al₂CuLi)和θ′相(Al₂Cu);热机影响区所有θ′相及大部分T1相溶解;而焊核区T1相和θ′相均完全溶解，并在焊核区产生较多位错。热影响区和基材为沿轧制方向的板条状晶粒;热机影响区晶粒发生偏转和变形;焊核区晶粒均发生再结晶，但焊核区边缘近热机影响区再结晶晶粒尺寸较小，而中心焊核区再结晶晶粒长大。

The friction stir welding (FSW) joints of 2195-T8 Al-Li alloy were prepared by straight cylindrical pin and threaded cylindrical pin. The effect of rotational speed and welding speed on the hole defect was investigated, and the microstructure of the FSW joint was observed. The results show that when the straight cylindrical pin is used at an inappropriate ratio of rotational speed to welding speed, continuous hole (or tunnel) at the bottom of advancing side forms. Meanwhile, this defect can be eliminated by the threaded cylindrical pin, and the joint strength is effectively enhanced. The strengthening precipitates of 2195-T8 Al-Li alloy consist of T1 (Al₂CuLi) and θ′(Al₂Cu). In thermo-mechanically affected zone (TMAZ), all θ′ precipitates but most T1 precipitates are dissolved. While, all the θ′ and T1 precipitates in nugget zone (NZ) are dissolved, and a lot of dislocations generate. The TMAZ grains under go deflection and deformation during the welding process. The NZ grains are recrystallized, and the recrystallized grains of the NZ close to the TMAZ are larger than those of the NZ center.

全文下载：http://pan.baidu.com/s/1c25EAcw

作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。

AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.

获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博，微信，领英，XING，脸书和推特与我们互动。

For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo, Weixin, LinkedIn, XING, Facebook and Twitter.