AZ80镁合金激光冲击表面改性
发布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新时间：2016-05-06
采用预固溶或预时效+LSP形变+后时效处理方法，研究预固溶或预时效以及后时效处理对激光冲击AZ80镁合金组织参数(孪晶和析出相)的影响。
AZ80镁合金激光冲击表面改性Surface modification for AZ80 magnesium alloy by laser shock processing采用预固溶或预时效+LSP形变+后时效处理方法，研究预固溶或预时效以及后时效处理对激光冲击AZ80镁合金组织参数(孪晶和析出相)的影响。结果表明:预固溶+激光冲击强化(LSP)形变处理使LSP强化层内产生高密度孪晶的形变带，离冲击表面越近，孪晶密度越高;经(170 ℃, 16 h)时效处理后，由于残余压应力热稳定性，预固溶+LSP形变强化层仍产生具有高密度孪晶的形变带;同时，弥散析出大量的颗粒状β-Mg17Al12相，优先在应力集中的形变带、孪晶界面和孪晶片层内析出;预时效析出的高密度β相极大地降低冲击强化层孪生产生率，孪晶体积分数明显降低，这是由于LSP诱导的高密度位错和析出相引起的。
The effect of pre-solution, pre-aging and post-aging on microstructure parameters (twins and precipitates) of laser shocked AZ80 magnesium alloy was investigated by pre-solution or pre-aging+LSP deformation+post-aging. The results show that the deformation band with high density twins in the strengthened layer is produced by the treatment of pre-solution+laser shock processing(LSP) deformation, and the twins density increases with decrease of the distance to the impacted surface. The deformation band with high density twins is still produced by treatment of aging treatment for 16 h under the temperature of 170 ℃ due to the stability of the residual compressive stresses. At the same time, a large number of granular β-Mg17Al12 phases are dispersively and preferentially precipitated in the deformation band, the twin interface and the twin lamellae where the stress concentration exists. The ratio of twinning in the strengthened layer is greatly reduced by the high density β phase precipitated from the pre-solution, and the volume fraction of the twins is decreased significantly, because of the high density dislocation and precipitates induced by LSP.
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博，微信，领英，XING，脸书和推特与我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo, Weixin, LinkedIn, XING, Facebook and Twitter.