热等静压参数对Ti-5Al-2.5Sn ELI粉末合金组织与性能的影响
发布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新时间：2016-05-04
采用无坩埚感应熔炼超声气体雾化法制备 Ti-5Al-2.5Sn ELI 预合金粉末, 并对预合金粉末进行表征. 研究了热等静压参数对 Ti-5Al-2.5Sn ELI 粉末合金显微组织和力学性能的影响.
热等静压参数对Ti-5Al-2.5Sn ELI粉末合金组织与性能的影响EFFECT OF HOT ISOSTATIC PRESSING PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF POWDER METALLURGY Ti-5Al-2.5Sn ELI ALLOY采用无坩埚感应熔炼超声气体雾化法制备 Ti-5Al-2.5Sn ELI 预合金粉末, 并对预合金粉末进行表征. 研究了热等静压参数对 Ti-5Al-2.5Sn ELI 粉末合金显微组织和力学性能的影响. 结果表明, 热等静压温度/压力的升高有助于提升粉末合金的致密度, 当粉末合金的致密度大于 99.5%时, 粉末合金的力学性能可以达到锻造合金的水平. 综合考虑粉末合金的致密度、显微组织和力学性能, Ti-5Al-2.5Sn ELI预合金粉末优选的热等静压工艺成型窗口为温度890~940 ℃, 压力120 MPa以上, 保温保压3 h. 包套对热等静压压力有屏蔽作用, 设计不当会降低粉末压坯的致密度. 通过优化包套设计、热等静压参数和工艺途径可以有效抑制包套的屏蔽作用, 提升粉末合金的致密度。Near-net-shape forming through powder metallurgy (PM) route is a cost-efficient approach to produce the hard-to-machining materials such as titanium alloys. Hot isostatic pressing (HIPing) is a common technique to fabricate PM titanium alloys and components. Prealloyed powder metallurgy through HIPing is considered as upgrade of precision casting for titanium alloys. Ti-5Al-2.5Sn ELI (extra-low interstitial) is a typical α-Ti alloy, which is widely used at cryogenic temperature. In this work, the Ti-5Al-2.5Sn ELI prealloyed powder was produced by electrode induction melting gas atomization. Characterization of the prealloyed powder was carried out to understand the following HIPing process. The influence of HIPing parameters on microstructure and mechanical properties of Ti-5Al-2.5Sn ELI powder compact was studied. The results show that the relative density of powder compact increases with the increase of HIPing temperature and pressure. The mechanical properties of powder compact can achieve those of wrought materials, when the relative density is more than 99.5%. To balance the relative density, microstructure and mechanical properties of the powder compacts, the optimized HIPing parameters for Ti-5Al-2.5Sn ELI powder are temperature in range of 890~940 ℃, the pressure above 120 MPa and holding for 3 h. The shielding effect of capsule will hinder the powder densification during HIPing process, which will likely cause non-uniform densification and degrade the relative density of powder compact. However, the shield effect can be weakened through proper tooling design and optimization of the HIPing procedure.
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博，微信，领英，XING，脸书和推特与我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo, Weixin, LinkedIn, XING, Facebook and Twitter.