上海艾荔艾金属材料有限公司Shanghai Ailiai Metallic Material Co.,Ltd. 上海艾荔艾金属材料有限公司Shanghai Ailiai Metallic Material Co.,Ltd. 作为值得信赖的合作伙伴和高品质金属合金的半成品供应商,上海艾荔艾金属材料有限公司拥有完善的服务体系和专业的团队。在同客户交易的过程中,我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求,艾荔艾致力于为客户提供优质的金属材料解决方案。

设为首页 | 加入收藏
13585522224

新闻资讯

您的位置:首页 > 新闻资讯 > 产品工艺 > 高温短时间时效处理对Mg-3Nd-1Zn合金微观组织及力学性能的影响

高温短时间时效处理对Mg-3Nd-1Zn合金微观组织及力学性能的影响

发布人:上海艾荔艾合金股份有限公司www.shailiai.cn 更新时间:2016-02-23
将固溶处理后的 Mg-2.7Nd-0.6Zn-0.5Zr 合金在 200~300℃之间进行不同温度及时间的高温时效处理,研究高温短时间时效处理对合金的微观组织和力学性能的影响,并利用OM、SEM 及TEM对合金的微观组织进行表征。
高温短时间时效处理对Mg-3Nd-1Zn合金微观组织及力学性能的影响Effects of high temperatureshort time ageing treatmenton the microstructures and mechanical properties of Mg-Nd-Zn alloy
将固溶处理后的 Mg-2.7Nd-0.6Zn-0.5Zr 合金在 200~300℃之间进行不同温度及时间的高温时效处理,研究高温短时间时效处理对合金的微观组织和力学性能的影响,并利用OM、SEM 及TEM对合金的微观组织进行表征。结果表明:固溶态Mg-2.7Nd-0.6Zn-0.5Zr合金经250~275℃高温短时间时效后,其室温屈服强度和抗拉强度最高增加了近70%和29%,宏观组织呈直线性不均匀分布的析出相。析出相的显微形貌为颗粒状,成分为Mg12Nd。析出相的线性分布方向平行于Mg基体(0001)Mg基面,合金的时效硬化行为与这种沿基面呈平行线分布的颗粒状析出相密切相关。在250~275℃范围内时效20~30min 后屈服强度较高,这是由于在变形过程中颗粒状Mg12Nd 的特殊分布对基面滑移及晶粒间协调变形起到很强的抑制作用。 
Among the traditional cast Mg alloys system, Mg–3Nd–Zn alloy with high strength and heat resistance, has been widely applied in aeronautics such as in engine box and wing rib of airplane. In present research the as-cast Mg-2.7Nd-0.6Zn-0.5Zr (NZ31) alloy was solution treated and then aged at temperature ranging from 200 to 300℃. The microstructure and mechanical properties of the aged specimens especially at relatively high temperature (225~300℃) were systematically characterized by OM, SEM, and TEM. A new kind of precipitates distributed in line was clearly found in the specimens aged at high temperature (225~275℃) for a short time (15~30min), which corresponded to a significant enhancement of hardness and tensile strength at room temperature.The TEM results showed that the precipitates distributed in line had a composition of Mg12Nd and a granular shape, and mainly formed along the (0001)Mg basal plane.The special distribution of the granular Mg12Nd precipitates was effective barriers to the basal slips and may probably restrain the intergranular coordination during tensile deformation, leading to a large strengthening effect, that is, the yield strength and ultimate tensile strength, of the NZ31 alloy aged at 250~275℃ for 20~30min, increased by about 70% and 29% respectively, in comparison with only the solutionized one.
全文下载:http://pan.baidu.com/s/1bxHkNs

作为值得信赖的合作伙伴和高品质金属合金的半成品供应商,艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中,我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求,艾荔艾致力于为客户提供最佳的金属材料解决方案。

AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.

获取更多我们供应的合金和服务信息,请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们,您也可以通过微博微信领英推特我们互动。

For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on WeiboWeixin, LinkedIn and Twitter.