Ti-55钛合金板材的超塑性变形行为
发布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新时间：2016-01-26
研究Ti-55钛合金板材在890~910 ℃、初始变形速率为4.4×10−4~1.76×10−3 s−1条件下的超塑性变形行为。
Ti-55钛合金板材的超塑性变形行为Superplastic deformation of Ti-55 alloy sheet研究Ti-55钛合金板材在890~910 ℃、初始变形速率为4.4×10−4~1.76×10−3 s−1条件下的超塑性变形行为。结果表明：在900 ℃、初始应变速率为8.8×10−4 s−1变形条件下平均晶粒尺寸在4 μm左右细小等轴晶的Ti-55钛合金板材的伸长率可达1 300%，表现出良好的超塑性；在一定成形温度下其超塑伸长率随应变速率的增大呈先增加后降低的趋势，存在最佳应变速率8.8×10−4 s−1，高于或低于8.8×10−4 s−1，板材的超塑变形能力均有明显降低；在高应变速率下，Ti-55板材的最大伸长率向高温区移动；超塑性变形过程中晶粒呈相互聚合长大的现象，应变诱发组织粗化是超塑变形过程中组织粗化的主要因素。
The superplastic tensile tests were performed at various temperatures (890−910 ℃) and initial strain rates (4.4×10−4−1.76×10−3 s−1). The results show that the fine-grained Ti-55 sheet, with an average grain size about 4 μm, exhibits excellent superplasticity. On the optimal superplastic condition of 900 ℃ and initial strain rate 8.8×10−4 s−1, a maximum elongation of 1 300% can be achieved. There exists an optimal strain rate of 8.8×10−4 s−1for each test temperature to get the highest strain, and the superplastic elongation would be significantly reduced at strain rates higher or lower than the optimum strain rate. The temperature for the best superplasticity of Ti-55 sheet moves to higher temperatures at high strain rates. The influence of the deformation on microstructure is obviously. The strain induce grain growth is one of the most prominent characteristic during superplastic deformation.
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博，微信，领英和推特与我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo, Weixin, LinkedIn and Twitter.