新闻资讯
定向凝固U720Li合金的高温塑性变形行为
发布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新时间：2016-01-12
采用热模拟实验研究了定向凝固与等轴晶 U720Li 合金的高温塑性变形行为,利用 OM,SEM 和 EBSD 分析了不同变形条件下合金的组织特征及动态再结晶机制.
定向凝固U720Li合金的高温塑性变形行为PLASTIC DEFORMATION BEHAVIOR OF DIRECTIONALLY SOLIDIFIED U720Li ALLOY AT ELEVATED TEMPERATURE
采用热模拟实验研究了定向凝固与等轴晶 U720Li 合金的高温塑性变形行为,利用 OM,SEM 和 EBSD 分析了不同变形条件下合金的组织特征及动态再结晶机制.结果表明,定向凝固与等轴晶合金的变形抗力均随变形温度升高而降低.定向凝固 U720Li 合金沿垂直柱状晶方向变形时变形抗力较低,枝晶间协调变形能力良好,未出现裂纹.与等轴晶合金相比,相同变形条件下定向凝固合金的动态再结晶组织均匀;高温塑性变形过程中,定向凝固合金的动态再结晶主要以晶界弓弯和位错塞积方式形核.定向凝固 U720Li 合金的变形激活能为 766 kJ/mol,比等轴晶合金降低了 38.6 %,定向凝固合金呈现出更好的热加工特性.
U720Li, a kind of precipitation type nickel-based superalloy, shows excellent mechanical properties at elevated temperature, which is also known as the difficult-to-deform alloy because of the high-alloying. To solve its deformation problem, new methods would be developed to enlarge the temperature deforming window and improve its plasticity. The hot compression deformation behaviors of directionally solidified and equiaxed grain U720Li alloys were studied by the MMS-300 testing system, as well as the dynamic recrystallization nucleation and growth mechanisms during the hot deformation were discussed. The microstructural characteristics of the alloy under different deformation conditions were examined using OM, SEM and EBSD. The results show that the deforming resistances of both directionally solidified and equiaxed grain U720Li alloys decrease with the increasing of deforming temperature. When the angle between the compression deforming direction and dendrite growth direction is 90°, the deforming resistance of directionally solidified U720Li alloy would be lower. With this direction, the coordination deformation between the dendrites becomes better and no crack can be found after deformation, which indicates that the deforming ability is best along 90°and it can be considered as the optimal deforming direction for directionally solidified U720Li alloy. Compared with equiaxed grain alloy, directionally solidified U720Li alloy performs higher deformation ability and more homogenous microstructures. During the deformation of directionally solidified U720Li alloy, bulging nucleation of grain boundary migration and dislocation pile-up induced nucleation are found as the main mechanism for the nucleation of dynamic recrystallization. In addition, the deformation activation energy of directionally solidified U720Li alloy is 766 kJ/mol, which is 482 kJ/mol lower than that of equiaxed grain alloy, indicating the directional solidified U720Li alloy exhibits better hot-working plasticity.
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博，微信和领英与我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo, Weixin and LinkedIn.