新闻资讯
中温旋锻变形Ti2448合金的显微组织及力学性能
发布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新时间：2016-01-07
采用XRD、TEM等手段对Ti-24Nb-4Zr-8Sn(质量分数，%)合金中温旋锻变形后的显微组织进行研究。
中温旋锻变形Ti2448合金的显微组织及力学性能Microstructure and mechanical properties of warm-swaged Ti2448 alloy
采用XRD、TEM等手段对Ti-24Nb-4Zr-8Sn(质量分数，%)合金中温旋锻变形后的显微组织进行研究。结果表明，经过较大的中温变形后，合金呈旋涡状大理石花纹组织且具有与旋锻轴向平行的强烈的á110ñ丝织构，这种典型的组织是由于具有á110ñ取向的晶粒在轴向拉应力状态下发生平面应变所致。TEM分析显示组织中含有高密度的小角晶界，应变分布不均匀。旋锻变形后，合金具有3.3%的超弹性变形和微弱的加工硬化行为。由于变形组织中留有大量的分布不均匀的残余应力，合金的塑性较差，在600 ℃下5 min去应力退火处理后，合金的塑性增强。
The warm-swaged structure of Ti-24Nb-4Zr-8Sn (mass fraction, %) was studied by XRD and TEM. The results show that the warm-swaged alloy presents a swirled marble-like structure and has a pronounced fibrous á110ñ texture along the swaging axis. This typical swirled structure forms owing to the planar strain deformation of the á110ñ-textured grains. According to the TEM observation, there are high densities of low angle grain boundaries, dislocations and asymmetric strain in the deformed structure. The warm-swaged alloy characterizes as prominent non-liner elasticity, 3.3% recoverable elastic strain, and trivial work hardening behavior. Due to the large and asymmetric strain, the plasticity of the deformed alloy is deteriorated, which can be improved after 5 min heat treatment at 600 ℃.
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博，微信和领英与我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo, Weixin and LinkedIn.