新闻资讯
2D70耐热铝合金显微组织均匀化热处理
发布人：上海艾荔艾金属材料有限公司www.shailiai.com
更新时间：2015-12-26
利用光学显微镜、扫描电子显微镜、能谱分析、差示扫描量热、X射线物相分析研究2D70耐热铝合金半连续铸锭的结晶相及合理的均匀化热处理制度。
2D70耐热铝合金显微组织均匀化热处理Homogenization treatment and microstructure of semicontinous casting ingot of 2D70 heat-resistance aluminum alloy
利用光学显微镜、扫描电子显微镜、能谱分析、差示扫描量热、X射线物相分析研究2D70耐热铝合金半连续铸锭的结晶相及合理的均匀化热处理制度。结果表明：合金半连续铸锭中枝晶偏析严重，存在大量非平衡共晶相，其成分为α(Al)+θ(Al2Cu)+S(Al2CuMg)，其初始熔化温度为505.4 ℃；在530 ℃温度以下进行均匀化时，合金中的难溶相Al7Cu2Fe、Al7Cu4Ni、Al9FeNi含量基本没有变化；合金合理的均匀化热处理制度为(490 ℃, 16 h)+(520 ℃, 16 h)。
The constituents of the semicontinuous casting ingot of 2D70 heat-resistance aluminum alloy and homogenization treatment were studied by optical microscopy (OM), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX),differential scanning calorimetry(DSC) and X-ray diffraction analysis (XRD). The results indicate that the semicontinuous casting ingot of 2D70 aluminum alloy presents a dendritic microstructure with severe segregation. The phases of the nonequilibrium eutectic are α(Al)+ θ(Al2Cu) +S(Al2CuMg) whose overheating temperature is 505.4 ℃. The volume fraction of hard dissolve phases such as Al7Cu2Fe, Al7Cu4Ni and Al9FeNi changes a little below 530 ℃. The reasonable homogenization treatment process of the alloy is (490 ℃, 16 h) +(520 ℃, 16 h).
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博和微信和我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo and Weixin.