新闻资讯
Al2O3陶瓷与5A05铝合金的间接钎焊工艺
发布人：上海艾荔艾金属材料有限公司www.shailiai.com
更新时间：2015-12-19
利用Al-Si-Mg钎料和自制工艺罩内置Mg粉方法，实现化学镀镍Al2O3陶瓷与5A05铝合金的真空钎焊连接，并分析保温时间及连接温度对接头界面结构和抗剪强度的影响。
Al2O3陶瓷与5A05铝合金的间接钎焊工艺Process of indirect brazing alumina to 5A05 Al alloy
利用Al-Si-Mg钎料和自制工艺罩内置Mg粉方法，实现化学镀镍Al2O3陶瓷与5A05铝合金的真空钎焊连接，并分析保温时间及连接温度对接头界面结构和抗剪强度的影响。结果表明：连接温度570 ℃，保温时间15 min为最佳工艺参数，此时接头界面结构为Al2O3/Ni(Ⅰ区)/Al3Ni2(Ⅱ区)/Al3Ni+Mg2Si(Ⅲ区)/α(Al)+Mg2Si(Ⅳ区)/5A05，接头的抗剪强度为25 MPa。随着保温时间的延长，Ni层变薄，Al3Ni2组织的变化不大，Al3Ni+Mg2Si组织逐渐变宽，且呈分散趋势；当保温时间延长到50 min时，Al3Ni+Mg2Si完全变成零乱的形状、大小不一的块状分布，且靠近5A05侧的Mg2Si消失。连接温度对界面组织结构的影响与保温时间的影响相似，接头断裂形式为脆性断裂。当接头的强度较低时，断裂发生在铝合金侧的α(Al)+Mg2Si附近；当接头的强度较高时，断裂发生在镀Ni层+界面区(Ⅱ区与Ⅲ区)。
Vacuum brazing of Al alloy and electroless nickel plated alumina was carried out with Al-Si-Mg brazing alloy and Mg powder in home-made technical hood. Effects of brazing temperature and holding time on the interface structure and shear strength of joints were analyzed. The experimental results show that the interface structure is Al2O3/Ni(Ⅰzone)/Al3Ni2 (Ⅱzone)/Al3Ni+Mg2Si(Ⅲ zone)/α(Al)+Mg2Si(Ⅳ zone)/5A05 when the brazing temperature is 570 ℃ and holding time is 15 min. The maximum shear strength of joints is up to 25 MPa. As the holding time prolongs, Ni layer becomes thin, Al3Ni zone changes little and Al3Ni+Mg2Si zone becomes thick and dispersed. When the holding time is 50 min, Al3Ni+Mg2Si zone becomes scattered and Mg2Si near 5A05 alloy disappears. The effect of brazing temperature on the joints is similar to that of holding time. The fracture mode of joints is brittle. When the shear strength of joints is lower, the joints fracture near α(Al)+Mg2Si on Al alloy side. When the shear strength of joints is higher, the joints fracture on Ni+interface (Ⅱzone and Ⅲ zone).
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博和微信和我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo and Weixin.