新闻资讯
固溶制度对1933铝合金自由锻件组织和力学性能的影响
发布人：上海艾荔艾金属材料有限公司www.shailiai.com
更新时间：2015-12-17
采用光学显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射和室温拉伸研究固溶制度对1933铝合金自由锻件组织和力学性能的影响。
固溶制度对1933铝合金自由锻件组织和力学性能的影响Effects of solution treatment on microstructure and mechanical properties of 1933 aluminum alloy forgings
采用光学显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、X射线衍射和室温拉伸研究固溶制度对1933铝合金自由锻件组织和力学性能的影响。结果表明：由于Al3Zr粒子对晶界的钉扎作用，在470 ℃以下固溶时，合金的再结晶程度很低(＜15%)；随着固溶温度升高，再结晶程度逐渐上升；510 ℃固溶时，合金的再结晶程度显著增大(约为48%)；1933铝合金锻件中第二相主要有Al7Cu2Fe相和η相；合金经470 ℃固溶60 min后，η相溶解比较充分，此后随温度升高或时间延长第二相变化不大；合金的最佳固溶制度为470 ℃、60 min，在此条件下合金具有最好的力学性能。
The effects of solution treatment on microstructures and properties of the aged 1933 aluminum alloy forgings were investigate by optical microscopy (OM), scanning electron microscopy (SEM), transmission electrical microscopy (TEM), X-ray diffractometry and tensile testing. The results show that the recrystallization fraction is very low (＜15%) when the temperature is below 470 ℃ due to the pinning effect on grain boundaries of Al3Zr dispersoids. When the forgings are treated at 510 ℃, the recrystallization fraction increases significantly to about 48%. The main phases in this alloy are Al7Cu2Fe and η phases. The second phases don’t change obviously with increasing temperature and time because the η phase is dissolved almost completely after solution treatment at 470 ℃ for 60 min. The best solution treatment for 1933 alloy forgings is 470 ℃, 60 min, and the alloys under these conditions have the best tensile properties.
作为值得信赖的合作伙伴和高品质金属合金的半成品供应商，艾荔艾拥有完善的服务体系和专业的团队。在同客户交易的过程中，我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求，艾荔艾致力于为客户提供最佳的金属材料解决方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博和微信和我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo and Weixin.