新闻资讯
热连轧对GH4169合金蠕变行为的影响
发布人：上海艾荔艾金属材料有限公司www.shailiai.com
更新时间：2015-12-05
通过对等温锻造和热连轧工艺制备的GH4169合金进行直接时效、蠕变性能测试和组织形貌观察，研究热连轧对GH4169合金组织结构及蠕变行为的影响。
热连轧对GH4169合金蠕变行为的影响Influence of hot continuous rolling on creep behaviors of GH4169 superalloy
通过对等温锻造和热连轧工艺制备的GH4169合金进行直接时效、蠕变性能测试和组织形貌观察，研究热连轧对GH4169合金组织结构及蠕变行为的影响。结果表明：与等温锻造合金相比，经热连轧后合金的晶粒尺寸较小，在等温锻造期间的变形特征仅为孪晶形变，而合金在热连轧期间除产生孪晶外，在孪晶中还存在位错的双取向滑移；采用不同工艺制备的合金均在{111}面上发生孪晶变形。在蠕变期间，热连轧期间形成的位错可促进孪晶内发生位错的不同取向滑移，减缓应力集中，提高合金蠕变抗力，致使合金在660 ℃、700 MPa条件下具有较长蠕变寿命。
By means of direct aging treatment, the creep properties measurement and microstructure observation of the isothermal forged (ITF) and hot continuous rolling (HCR) GH4169 alloys, the influence of the HCR on the microstructure and creep behavior of GH4169 alloy was investigated. The results show that the grain size of HCR alloy is finer than that of the ITF alloy. The only deformed feature of the ITF alloy is twinning. However, the twinning and dislocation slippings with double orientations in the twinning appear in the alloy during HCR. Moreover, the deformed twinnings occur on {111} planes in the alloys prepared by different technics. During creep, the dislocations formed during HCR can promote the dislocations slipping of different orientations within the twinning to decrease the stress concentration, which may enhance the creep resistance and result in longer creep lifetime of the alloy under the applied stress of 700 MPa at 660 ℃.
获取更多我们供应的合金和服务信息，请致电086-021-67660801或发电子邮件kefu@ailiaigroup.com联系我们，您也可以通过微博和微信和我们互动。
For more information on the alloys and services that we supply, call us at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on Weibo and Weixin.