新闻资讯
微量硼的添加对Ti-9V-3Al-4Sn-5Mo合金显微组织和力学性能的影响
发布人：上海艾荔艾金属材料有限公司www.shailiai.com
更新时间：2015-08-29
为掌握B元素的添加对Ti-9V-3Al-4Sn-5Mo合金显微组织和力学性能的影响规律，采用电子探针微区分析仪(EPMA)、光学显微镜(OM)、扫描电镜(SEM)、万能试验机(UTM)等设备，详细研究(Ti-9V-3Al-4Sn-5Mo)1-xBx(x=0，0.04，0.08)合金的成分、显微组织与力学性能等。
微量硼的添加对Ti-9V-3Al-4Sn-5Mo合金显微组织和力学性能的影响Effect of minor boron additions on microstructures and
mechanical properties of Ti-9V-3Al-4Sn-5Mo alloy
为掌握B元素的添加对Ti-9V-3Al-4Sn-5Mo合金显微组织和力学性能的影响规律，采用电子探针微区分析仪(EPMA)、光学显微镜(OM)、扫描电镜(SEM)、万能试验机(UTM)等设备，详细研究(Ti-9V-3Al-4Sn-5Mo)1-xBx(x=0，0.04，0.08)合金的成分、显微组织与力学性能等。研究结果表明：B的添加可以明显细化Ti-9V-3Al-4Sn-5Mo合金的晶粒，且B元素在合金中以TiB相的形式存在。随着B质量分数(0，0.04%，0.08%)的增加，TiB相的质量分数亦逐渐增加，轧制态和固溶态合金的强度亦逐渐增加，时效态合金的强度先增加后减少。轧制态、固溶态以及时效态合金的塑性均先增加后减少。
In order to understand the effect of minor boron
additions on microstructures and mechanical properties of Ti-9V-3Al-4Sn-5Mo
alloy, the chemical compositions, microstructures and mechanical properties of
(Ti-9V-3Al-4Sn-5Mo)1-xBx (x=0, 0.04, 0.08) alloys were
systematically studied by electron probe micro-analyzer (EPMA), optical
microscope (OM), scanning electron microscope (SEM) and universal testing
machine (UTM). The obtained results are described as follows: B additions can
obviously refine the crystal grains of Ti-9V-3Al-4Sn-5Mo alloy, and exist in the
form of TiB phases. With increasing B additions (0, 0.04%, 0.08%), the contents
of TiB phase and the tensile strength of the rolled and solution-treated alloys
increase, while the tensile strength of the aged alloys first increases and then
decreases. The ductility of the rolled, solution-treated and aged alloys first
increases and then decreases.
以上资料由上海艾荔艾金属材料有限公司提供，欢迎新老客户来电洽购。
本文来自上海艾荔艾金属材料有限公司http://www.shailiai.com，转载请注明出处。
前一页：氧含量对TB8钛合金力学性能的影响
后一页：Si对Ti-600合金热稳定性能的影响