新闻资讯
高强钛合金挤压管材的组织及性能
发布人:上海艾荔艾金属材料有限公司www.shailiai.com
更新时间:2015-08-28
对亚稳β高强钛合金Ti-1300管材挤压成形进行了研究,分析并测试了挤压管材在不同热处理制度下的组织及力学性能,并采用扫描电镜对拉伸试样断口形貌特征进行了观察。
高强钛合金挤压管材的组织及性能Microstructure and mechanical properties of high strength
titanium alloy extruded tube
对亚稳β高强钛合金Ti-1300管材挤压成形进行了研究,分析并测试了挤压管材在不同热处理制度下的组织及力学性能,并采用扫描电镜对拉伸试样断口形貌特征进行了观察。研究结果表明,Ti-1300亚稳β钛合金通过选择合适的挤压工艺参数可以制备出高质量管材,挤压态管材经860
℃固溶处理后组织为完全β相单相组织,断口布满韧窝,具有较高的塑性,有利于进一步冷轧变形;560
℃时效后为等轴β晶粒内弥散分布针状α相,断口为韧脆混合断口,强度可达1 310 MPa,伸长率为8%。
The extrusion forming of metastable β high strength
titanium alloy Ti-1300 tube was studied. The room-temperature tensile properties
were tested and the microstructures of specimens were characterized. The
fractographs of tensile specimens were observed by SEM. The results show that,
the high quality extruded tubes of high strength titanium alloy Ti-1300 are
manufactured with suitable parameters. The extruded tube after ST 860 ℃ consists
of only β phases and has plastic dimple fracture surface. The ductility of raw
extruded and solution state tubes is excellent, which is advantageous to deep
deformation process. The extruded tubes of Ti-1300 alloy after aging treatment
are composed of diffusion acicular α phase and β matrix and have plastic and
brittle mixed fracture surface. Their strength reaches 1 310 MPa and the
elongation is 8%.
以上资料由上海艾荔艾金属材料有限公司提供,欢迎新老客户来电洽购。
本文来自上海艾荔艾金属材料有限公司http://www.shailiai.com,转载请注明出处。