新闻资讯
7075铝合金热变形时动态再结晶晶粒度演化模型
发布人：上海艾荔艾金属材料有限公司www.shailiai.com
更新时间：2015-08-24
7075铝合金在热变形过程中主要发生连续动态再结晶，在温度为250~450 ℃、应变速率为0.1~1 s-1的条件下，对多组圆柱试样进行热模拟压缩实验。采用金相定量法对热变形后材料的显微组织晶粒度进行测量，建立7075铝合金热变形时动态再结晶晶粒度演化模型。
7075铝合金热变形时动态再结晶晶粒度演化模型Dynamic recrystallization grain size evolution model of 7075
aluminum alloy during hot deformation
7075铝合金在热变形过程中主要发生连续动态再结晶，在温度为250~450 ℃、应变速率为0.1~1
s-1的条件下，对多组圆柱试样进行热模拟压缩实验。采用金相定量法对热变形后材料的显微组织晶粒度进行测量，建立7075铝合金热变形时动态再结晶晶粒度演化模型。结果表明：根据唯象理论的指数模型，利用线性回归方法求得7075铝合金热塑性变形组织晶粒度的演化模型；将该模型导入到有限元软件中能够预报7075铝合金热变形过程的连续动态再结晶晶粒度；预报结果与实验结果非常接近，说明将该演化模型导入有限元软件中可以较为准确地预测7075铝合金热变形过程动态再结晶晶粒度。
Continuous dynamic recrystallization (CDRX) of 7075
aluminum alloy occurs during hot deformation. The thermal compression experiment
about the group of cylindrical specimen was done at the temperature of 250-450 ℃
and the strain rate of 0.1-1 s-1. The microstructure grain size of
7075 aluminum alloy was measured by the metallographic quantitative method, the
microstructure grain size evolution model of 7075 aluminum alloy. The result
shows that, according to the exponential model of phenomenological theory and
the linear regression method, the microstructure grain size evolution model of
7075 aluminum alloy during the thermoplastic deformation can be worked out. And
then, by the finite element software with the evolution model continuous dynamic
recrystallization grain size of 7075 aluminum alloy during hot deformation was
predicted. The forecasting result is very close to the experimental one.
Therefore, by finite element software with the evolution model, dynamic
recrystallization grain size of 7075 aluminum alloy during the hot deformation
process can be accurately predicted.
以上资料由上海艾荔艾金属材料有限公司提供，欢迎新老客户来电洽购。
本文来自上海艾荔艾金属材料有限公司http://www.shailiai.com，转载请注明出处。