上海艾荔艾金属材料有限公司Shanghai Ailiai Metallic Material Co.,Ltd. 上海艾荔艾金属材料有限公司Shanghai Ailiai Metallic Material Co.,Ltd. 作为值得信赖的合作伙伴和高品质金属合金的半成品供应商,上海艾荔艾金属材料有限公司拥有完善的服务体系和专业的团队。在同客户交易的过程中,我们力求根据不同的应用需求将我们的产品做到精益求精。针对当前和未来的市场需求,艾荔艾致力于为客户提供优质的金属材料解决方案。

设为首页 | 加入收藏
13585522224

新闻资讯

您的位置:首页 > 新闻资讯 > 产品工艺 > 磷系润滑添加剂对7050铝合金摩擦学性能的影响

磷系润滑添加剂对7050铝合金摩擦学性能的影响

发布人:上海艾荔艾金属材料有限公司www.shailiai.com 更新时间:2015-08-15
采用环-块摩擦磨损试验机考察磷酸三甲酚酯(TCP)、亚磷酸二丁酯(DBPi)、二辛基二硫代磷酸锌(ZDDP)和二正丁基磷酰胺(DBPA) 4种磷系润滑添加剂对7050铝合金摩擦学性能的影响,并探讨磷系润滑添加剂与7050铝合金的摩擦学作用机制。

磷系润滑添加剂对7050铝合金摩擦学性能的影响Effects of phosphorus additives on tribological performance of 7050 aluminum alloy

采用环-块摩擦磨损试验机考察磷酸三甲酚酯(TCP)、亚磷酸二丁酯(DBPi)、二辛基二硫代磷酸锌(ZDDP)和二正丁基磷酰胺(DBPA) 4种磷系润滑添加剂对7050铝合金摩擦学性能的影响,并探讨磷系润滑添加剂与7050铝合金的摩擦学作用机制。结果表明:4种磷系润滑添加剂均能降低钢-铝摩擦副间的摩擦因数,但添加剂对铝合金抗磨作用的影响因添加剂结构不同而产生较大差异;磷酸三甲酚酯和二正丁基磷酰胺能增强7050铝合金的抗磨作用,其中二正丁基磷酰胺的效果更优;而亚磷酸二丁酯和二辛基二硫代磷酸锌会增加铝合金的磨损,以亚磷酸二丁酯为甚。钢-铝摩擦副间的摩擦因数随添加剂浓度增加而减少,但随载荷增加而提高;以二正丁基磷酰胺润滑的铝合金的磨损量随添加剂浓度增加而减少,但随载荷增加而提高;而以亚磷酸二丁酯润滑时,随载荷和添加剂浓度提高,磨损量均呈增加趋势。在所有的摩擦过程中均出现了磨粒磨损、粘着磨损和化学腐蚀磨损3种磨损机制,其中化学腐蚀磨损和磨粒磨损是磷系润滑添加剂的主要摩擦学作用机制。

Tribological performance of four kinds of phosphorus lubricating additives such as  tricresyl phosphate(TCP), dibutyl phosphite(DBPi), zinc dioctyldithiophosphate(ZDDP)and dibutyl phosphate acylamide(DBPA) on 7050 aluminum alloy were investigated with ring on block tribotester. The tribological mechanism of aluminum alloy lubricated by phosphorus additives was also discussed. The results show that all these phosphorus additives may decrease the friction coefficient of the steel-aluminum pairs, but the effects on the wear action of aluminum alloy are different. Tricresyl phosphate and dibutyl phosphate acylamide increase the anti-wear property of 7050 aluminum alloy, and the later shows better. Dibutyl phosphite and zinc dioctyldithiophosphate increase abrasion effect of the aluminum alloy and dibutyl phosphite shows worse effect. Friction coefficient between steel and aluminum decreases with increasing the content of lubricating additives, while increases with increasing the load. Wear loss of aluminum alloy lubricated by dibutyl phosphate acylamide (DBPA) decreases with increasing the additive content, while increases with increasing the load. However, when being lubricated by dibutyl phosphate (DBPi), the wear amount of aluminium alloy is improved with increasing the additive content and load. There are abrasion wear, adhesive wear and chemical corrosion abrasion displayed during the friction process, and the chemical corrosion wear and abrasion wear are the main wear mechanisms of phosphorus additives.

全文下载:http://pan.baidu.com/s/1pJoqeSj

以上资料由上海艾荔艾金属材料有限公司提供,欢迎新老客户来电洽购。
本文来自上海艾荔艾金属材料有限公司http://www.shailiai.com,转载请注明出处。