新闻资讯
2A12铝合金当量加速腐蚀试验
发布人:上海艾荔艾金属材料有限公司www.shailiai.com
更新时间:2015-04-17
基于某海域舰面停放环境谱,采用2A12材料制备模拟件,在护航舰面采取悬挂方式开展自然暴露试验,同时在试验室环境下开展了加速腐蚀试验。利用三维体式显微镜对腐蚀形貌进行观测和测量。
基于某海域舰面停放环境谱,采用2A12材料制备模拟件,在护航舰面采取悬挂方式开展自然暴露试验,同时在试验室环境下开展了加速腐蚀试验。利用三维体式显微镜对腐蚀形貌进行观测和测量。结果表明,模拟件在当量加速腐蚀试验时间和舰面自然老化时间匹配时,腐蚀程度在95%置信度下一致。
Based on an environmental spectrum of certain area, 2A12 was used to prepare for simulation pieces. Part of simulation pieces were hanged on the escort plane while accelerated environment corrosion test were carried out under laboratory. Microscopes were used to detect and measure the corrosion morphology. The results showed that the accelerated corrosion and the natural aging corrosion were consistent at the confidence level of 95% while time matched.
下载链接:http://pan.baidu.com/s/1sjOCSpf
以上资料由上海艾荔艾金属材料有限公司提供,欢迎新老客户来电洽购。
本文来自上海艾荔艾金属材料有限公司http://www.shailiai.com,转载请注明出处。